Enectiva NarrowBand transmitter
This remote transmitter made in Czech Republic allows you to configurate 4 inputs for remote reading water, gas, heat and electric power meters. With this device you can save your space, instead of four different transmittters you can now connect all four sensors only into one device. Reading of more meters or values from various sensors mounted on the same site as electricity switching room could be solved with only one device.
- All four inputs of our transmitter should be configured for binary, pulse, analog (voltage) or M-bus functioning
- Unit is capable also to supply connected sensors with 12 VDC, 10-20 mA from built-in power supply (but with limited lifetime of battery).
- You can set message frequency from 2x/day to 140 times a day. Estimated battery life for 2x message/day is 5 years, for 140x messages/day up to a year.
Technical parameters
- Dimensions (WxHxD): 100x68x50mm, max. length 135mm incl. grip and bushings, without antenna
- Power: replaceable lithium battery D size or 12-24VDC
- Battery life: approx. 5 years (2 message/day) about 1 year with 140 message/day. Depends on the power consumption of connected sensors (if any) and ambient temperature
- Protection degree: IP67
- Moisture: 0 - 99%
- Operating temperature: -10°C / +55°C
- Short-term temperature: -20°C / +70°C
- Long-term storage temperature: +5°C to +35°C
- Number of inputs: 2-4 in various configuration under clients needs; pulse/analog
- Binary input: 3,6 VDC; 0,12 mA
- Pulse input max. frequency: 10 Hz, pulse lenght (High/Low) ≥ 30ms
- Analog input: 0-5 VDC
Radio communication
- Comm. protocol: LoRaWAN (OTAA)
- Frequency: 868 MHz
- Enhanced power: 25 mW
Enectiva LoRaWAN transmitter
| Quantity | VAT not included in the price |
|---|---|
| 1 | 100 EUR |
| 10 | 88 EUR |
| 100 | 80 EUR |
Shipping worldwide